|
|
|
Isunjoin Technology Co., Ltd.
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
CA-8800 Series |
Description : Intelligent Fast Ethernet Media Converter Series
Overview
Due to its unique function of link failure alert between electrical port and optical one, the intelligent 10/100M adaptive fast Ethernet media converter can replace the media converter with network management to greatly reduce the system cost.
CA-8800 Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.
|
 |
Features : • 10/100Mbps auto-sensed, facilitating network upgrade
• Built-in efficient switching core to implement flow control and reduce broadcast packets
• full-duplex and half-duplex auto-sensed
• Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation
• Supporting Link Failure Alert (LFA)
• Supporting half /full-duplex of FX and link failure alert with optional dip-switch
• Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique)
• Supporting low-timelag transmission
• Supporting the transmission of extra-long packets up to1600 bytes
• Supporting the transmission of extra-long VLAN packets
• Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets
• Supporting STP to form a redundant network
• Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime;
• Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiber
|
|
Technical Indexes :
|
Parameter
|
Specifications
|
|
Access mode
|
10/100Mbps
|
|
Standard
|
IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
|
|
Wavelength
|
850nm/1310nm/1550nm
|
|
Transmission distance
|
Dual-fiber multi-mode: 2 km;
Dual-fiber single mode: 20/40/60/80/100/120 km;
Single fiber single mode: 20/40/60/80/100 km
Category-5 twisted pairs: 100m
|
|
Port
|
One RJ45 port:
For connecting STP/UTP category-5 twisted pairs
One optical port:
Multi-mode, dual fiber: SC or ST (50, 62.5/125μm)
Single mode, dual fiber: SC or FC (9/125μm)
Single mode Single fiber: SC or FC (9/125μm)
|
|
Conversion means
|
Media conversion, store-and-forward/cut-through
|
|
MAC address table
|
1K
|
|
Buffer space
|
1Mbit
|
|
Flow control
|
Full duplex: flow control;
Half duplex: back pressure
|
|
Delay
|
Store-and-forward: 9.6μs; cut-through: 0.9μs
|
|
BER
|
<19-9
|
|
MTBF
|
100,000 hours
|
|
LED indicator
|
POER (power supply); FX LINK/ACT (optical link/action)
FDX (FX full duplex), TP LINK/ACT (twisted pairs link/action)
TP 100 (100M transmission rate of twisted pairs),
FX 100 (100M transmission rate of optical fiber)
|
|
Power supply
|
DC5V 1A (external), AC220 0.5A/DC-48 (internal)
|
|
Power consumption
|
<2W
|
|
Operating temperature
|
-10~55ºC
|
|
Operating humidity
|
5%~90%
|
|
Maintaining temperature
|
-40~70ºC
|
|
Maintaining humidity
|
5% ~ 90% non-condensing
|
|
Dimensions
|
140 mm (W) * 110 mm (D) * 40 mm (H) (internal power supply)
71mm (W) * 94mm (D) * 26 mm (H) (external power supply)
25 mm (W) * 152 mm (D) * 128 mm (H) (card type)
|
Order Information
Model Working wavelength Fiber Electrical port Fiber model Tx power(dBm) Rx power(dBm) Transmission
distance
CA-8800 850/1310nm SC/ST RJ-45 Dual-fibe Multi-mode -22 to -12 = -30 2km
CA-8800-S20 1310nm FP SC/FC RJ-45 Single modeDual -fiber -15 to -8 = -37 20km
CA-8800-S40 1310nm FP SC/FC RJ-45 Single mode Dual-fiber -8 to -3 = -37 40km
CA-8800-S60 1310nm FP SC/FC RJ-45 Single mode Dual-fiber -3 to 0 = -37 60km
CA-8800-S80 1550nm DFB SC/FC RJ-45 Single-mode
Dual-fiber -8 to -3 = -40 80km
CA-8800-S100 1550nm DFB SC/FC RJ-45 Single mode Dual-fiber -3 to 0 = -40 100km
CA-8800-S120 1550nm DFB SC/FC RJ-45 Single mode Dual -fiber 0 to 3 = -40 120km
CA-S8800-20 1310/1550nm FP SC RJ-45 Single mode single-fiber -13 to -8 = -36 20km
CA-S8800-40 1310/1550nm FP SC RJ-45 Single mode single-fiber -8 to -3 = -36 40km
CA-S8800-80 1310/1550nm DFB SC RJ-45 Single mode Single-fiber -5 to -3 = -36 80km
|
|
Application : 10/100Mbps fast optical Ethernet long-distance transmitting network |
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page